![]() St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat *Other* Optional Admin Commands (0x0017): Security Format Frmw_DL *Other* Local Time is: Mon May 13 10:34:11 2019 CESTįirmware Updates (0x14): 2 Slots, no Reset required Smartctl 6.6 r4324 (local build)Ĭopyright (C) 2002-16, Bruce Allen, Christian Franke, = START OF INFORMATION SECTION = I tried to check the health of the devices with these commands, but they don't give me stats like "Reallocated_Sector_Ct" or "Reported_Uncorrect". blk_update_request: I/O error, dev nvme1n1, sector 68159504 nvme nvme1: completing aborted command with status: fffffffc blk_update_request: I/O error, dev nvme1n1, sector 452352001 ![]() nvme nvme1: completing aborted command with status: 0007 In dmesg I found this: nvme nvme1: I/O 311 QID 1 timeout, reset controller Or mdadm -re-add /dev/md2 /dev/nvme1n1p3Īnd after the resync it works for a day or two. I then just re-add the failed partition with mdadm -re-add /dev/md2 /dev/nvme0n1p3 One time it's nvme0n1p3 and next time it's nvme1n1p3. Md0 : active (auto-read-only) raid1 nvme1n1p1 nvme0n1p1 Md2 : active raid1 nvme1n1p3(F) nvme0n1p3 The /proc/mdstat file currently contains the following: It could be related to component device /dev/nvme1n1p3. It only disables 1 partition as you can see here: This is an automatically generated mail message from mdadmĪ Fail event had been detected on md device /dev/md/2. ![]() Here is the hardware/hoster it's running onĪlmost every second day mdadm monitoring reports a fail event and leaves the array degraded. Version 2.55 includes several minor improvements.I'm running debian stable with a 2 x nvme Raid 1. HD Tune Pro is an extended version of HD Tune which includes many new features such as: write benchmark, secure erasing, AAM setting, folder usage view, disk monitor, command line parameters and file benchmark.Ĭlick here for more information and to download a trial version.Ī new version of HD Tune is also available. Fixed display problem with high DPI font settings.Added option to perform quick Error Scan with command line parameters.Added option to perform the transfer rate test on the entire surfaceĢ9th December 2008: HD Tune Pro 3.50 released!.Health (S.M.A.R.T) and temperature display support for external drives.Fixed display issue with high DPI font settingsĢ8th December 2009: HD Tune Pro 4.00 released!.Added option to monitor health status during tests.Fixed incorrect position with Erase function with sector sizes larger than 512 bytesĩth January 2010: HD Tune Pro 4.01 released.Fixed incompatibility issue with certain USB sticks.Fixed incompatibility issue with nVidida drivers under Windows 7 64-bit. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |